Useful

Create soliflorous bulbs

Create soliflorous bulbs


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Equipment

1 small hacksaw Bayonet bulbs 1 small screwdriver Solvent 14/10 nickel silver wire 1 cutting pliers

Production

5 'Sawing

Using the small hacksaw, cut the bulb at the level of the hook in the middle of the bayonet and remove the sawn part by pulling on it.



10 'Emptying

Carefully break the glass tube protruding from the bayonet and insert the small screwdriver into the neck, tilting it slightly, in order to break the glass tube in the center of it. Scrape the edge of the neck to remove the material used to seal and empty the bulb of its broken and dust.

5 'Cleaning

Using the solvent, remove the inscriptions on the bottom of the ampoule and wash it in soapy water.

5 'Introduction of the wire

Cut a length of about 30 centimeters of wire and twist it as shown in the sketch starting from the center of the wire. Introduce the wire thus formed in the bulb.



Advice

Keep your used bulbs throughout the year: the soliflore will be all the more economical.



20 decorations on Glass © Flammarion editions, 2003



Comments:

  1. Vitilar

    You are not right. I am assured. I suggest it to discuss. Write to me in PM, we will communicate.

  2. Vobei

    Actually. Tell to me, please - where I can find more information on this question?

  3. Kagore

    What a pleasant response

  4. Connla

    the very funny phrase

  5. Rabbani

    Absolutely agree with you. Something is also good in this, I agree with you.

  6. Westby

    And that we would do without your excellent phrase

  7. Gakree

    Bravo, seems brilliant idea to me is

  8. Triston

    wonderfully, it's the entertaining piece



Write a message