Mistakes to avoid with DIY glue

Mistakes to avoid with DIY glue

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Glue is an essential element for all DIY work, whether fixing, repairing or assembling. But the preconceived ideas concerning this material are considerable and during the purchase, it is not easy to find your way around when you are new to the material. And this is where you can jeopardize the renovation of your interior. Here are some mistakes to avoid for optimal use of the glue.

The glue does not stick more when you put a lot of it

We are often tempted to put more glue than necessary so that the surface adheres better but it is a big mistake! Indeed, for the glue to be effective, it is necessary to spread a thin layer without it having an excess thickness or irregularities. In addition, by putting too much glue, you risk making it overflow on both sides of the surfaces to be fixed, which can be quite unsightly.

Don't think you can't peel off the glue

Again, this is a completely false misconception. However, it is sometimes very difficult to take off an element without damaging the wall, the paint or the wallpaper, on which it is placed. If you know that you are going to need to peel off the object, use a peelable fixing putty like the Sader idea product! detachable fix. You can thus remove a mirror glued to tiles or a coat rack attached to the wall.

Glue does not stick instantly

It is often thought that once the support is glued and applied to the surface to be bonded, the action is final and that one should therefore not be mistaken. In reality, many glues allow you to adjust the result because they do not stick instantly. If cyanoacrylate adhesives stick instantly, there are really repositionable adhesives like MS polymer. It's up to you to choose the model that suits you best.

Not all glues are the same

Note that not all glues have the same characteristics and are not used for the same purpose! Each glue is designed for one or more uses that must be respected in order to obtain the best possible result. We will choose for example a putty glue to fix a material without using tools but rather a neoprene glue to glue leather and a polyurethane glue to glue wood. Do not hesitate to ask a seller for advice when you are in front of the appropriate department store.

There is no glue that does not stick

We often hear it said after a gluing failure that it is because of the glue! Well that's not true because most of the pasting failures are due to improper implementation. In addition to the adhesive suitable for your needs, you must prepare your support well. Indeed, for a perfect and burr-free installation, the surface must be clean, dry, regular and non-friable.


  1. Jozsi

    so, what is next!

  2. Onyebuchi

    We picked up a lot, ATP.

  3. Gavan

    the exact phrase

  4. Joen

    I apologize for interrupting you, I would also like to express my opinion.

  5. Karamar

    Here those on! First time I hear!

  6. Norvin

    I'm sorry, but, in my opinion, they were wrong. I propose to discuss it. Write to me in PM.

Write a message